RunCam Device Protocol. RunCam Device Protocol could be the communication that is serial initially developed for the RunCam Split and analog cameras.

RunCam Device Protocol

RunCam Device Protocol could be the communication that is serial initially developed for the RunCam separate and analog digital cameras.

The protocol itself supports not just camera that is full menu navigation but additionally triggering recording on split style digital digital cameras along with interacting the available sd-card room, syncing the present date, composing to your osd and switching the digital digital camera or wifi function (if available) on / off.

Not all the top features of the protocol are supported in betaflight but both betaflights help while the protocol it self have been in continued development.

Lately just like TBS Smartaudio and IRC Tramp others (for example Caddx) began to follow help for the protocol inside their digital cameras.

Currently supported features in betaflight

The present protocol specification is found right right here:

Supported cameras/devices and procedures

Analog/classic fpv cameras

Any RunCam Camera that supports UART digital digital camera settings should work.

Micro Swift 3, Runcam Racer 2, etc.

RunCam Split cameras (1,2,mini and mini 2 etc.) also work nonetheless may necessitate a firmware revision. The runcam that is first delivered with another type of protocol – remember to upgrade it in either case as more recent firmwares enhanced different things.

OSD Menu Control

Going into the menu that is osd alter settings should make use of the exact same stick commands as FPV Camera Control

Camera Button Simulation (Record/Photo/Wifi/Power Key)

Firmware: BetaFlight Firmware (≥3.2.0) Configurator software: Betaflight Configurator (≥3.2.0)

Any available UART screen on the BetaFlight

1.Connect the RunCam separate with all the UART user interface associated with the trip Controller

2.Make the trip Controller recognize the Split

As an example, we connect the separate towards the UART 3 screen in the BetaFlight: link the journey controller to your computer, then start the Betaflight Configurator. Within the Peripherals line regarding the line UART3 (regarding the Ports tab), choose RunCam Device and then click Save And Reboot.

3.Instructions associated with the functions for the digital camera and transmitter that is assigning in their mind

Within the Betaflight Configurator, navigate towards the Modes tab. You can find new CAMERA WI-FI, CAMERA ENERGY and CAMERA CHANGE modes.

CAMERA WI-FI: turn on/off the WIFI of this digital digital camera. Whenever within the OSD associated with digital camera, this really is utilized to ensure your selection. CAMERA ENERGY: start/stop the movie. Whenever into the OSD associated with the digital digital digital camera, that is utilized to go into the next menu product. CAMERA CHANGE MODE: switch one of the three modes, movie, picture and OSD setting mode. Whenever into the OSD regarding the digital digital camera, this may leave the menu. Assign any available channel to the big event you’ll need, as an example:

Assign the AUX1 to your CAMERA WI-FI, range 1900-2100 Assign the AUX2 into the CAMERA ENERGY, range 1900-2100 Assign the AUX3 towards the CAMERA CHANGE MODE, range 1900-2100

4.Assign the channel towards the switch associated with controller

Please choose your Model regarding the controller, then use of the Mixer user interface and designate the channel to your switch associated with the controller. Take opentx 2.2.0 as an example, assign the channels CH5, CH6, and CH7 to SA, SB, SD correspondingly.

Energy the trip Controller while the RunCam separate

Set the SA to your base, the digital camera turns on/off the WIFI Set the SB to your base, the digital digital camera starts/stops the movie Set the SD into the base, the digital camera switches on the list of three modes: video clip, picture and OSD environment mode

Caddx Turtle v2

Caddx also applied help for the RunCam Device protocol via their firmware that is last up-date. Take note nevertheless that just the turtle v2 correctly supports UART settings since the v1 had some incompatible connections on the board despite having UART pads.

For the v1 it is possible to use FPV Camera still Control to go into the OSD and get a grip on the digital camera via your transmitter.

Beware that OSD control is disabled during recording.

OSD Menu Control

Going into the menu that is osd alter settings should assist exactly the same stick commands as FPV Camera Control

Camera Button Simulation (Recording)

Just like the RunCam Split recording that is starting/stopping a switch is supported. Stick to the directions outlined above to create it up.

Other supported devices

RunCam Control Adapter (OSD Cable Simulation)

The RunCam Control Adapter, which connects involving the OSD pin plus an UART in the FC, permits navigation associated with OSD menu through the transmitter. Unlike the FPV Camera Control nonetheless no resistors that are additional capacitors are expected.

With regards to the unit some keys that are shortcut also supported. As an example keeping roll pressed to to your right will switch the currently chosen scene when making use of a Micro Swift2.